Views:9 Author:Site Editor Publish Time: 2021-03-24 Origin:Site
As we all know, everything needs maintenance, so that the usability of things is difficult to use for a long time. However, the same is true for CNC machining centers. The correct operation and maintenance of CNC equipment is one of the key factors for the correct use of CNC equipment. The correct operation and use can prevent abnormal wear of the machine tool and avoid sudden failures; daily maintenance and equipment are maintained in good condition. The state of the art, delays the deterioration process, discovers and eliminates hidden troubles in time, and always guarantees safe operation.
The specific operation requirements of CNC precision machining
1. The use environment of numerical control equipment In order to improve the service life of numerical control equipment, it is generally required to avoid direct sunlight and other heat radiation, and to avoid places with too much humidity, excessive dust or corrosive gas. The precision numerical control equipment should be far away from equipment with large vibration, such as punching machine, forging equipment, etc.
CNC precision machining
2. Good power supply guarantee In order to avoid the influence of large power fluctuations (greater than ±10%) and possible instantaneous interference signals, machining CNC equipment generally adopts dedicated line power supply (for example, it is divided into one way from the low-voltage power distribution room for use by CNC machine tools) Or adding a voltage stabilizing device, etc., can reduce the impact of power supply quality and electrical interference. Recommended reading: CNC precision machining process for the solution of tool marks
Third, formulate effective operating procedures In the use and management of CNC machine tools, a series of practical and effective operating procedures should be formulated. For example, lubrication, maintenance, reasonable use and standardized shift system are the main contents of the use and management of CNC equipment. Formulating and complying with CNC precision machining operating procedures is one of the important measures to ensure the safe operation of CNC machine tools. Practice has proved that many failures can be reduced by observing operating procedures.