Causes And Solutions Of Cracks In The Process Of Custom Tubing Bending

Analysis of the causes of cracks in the process of custom tube bending: When the intermediate frequency eluates the pipe and its protection, the defects generated during the micro-crack, when the steel pipe is inductively heated and bent, when it exceeds a certain level of deformation temperature and a certain level of deformation, the elbow The part is treated at the elbow, and microcracks are generated on the outside. Both of these conditions are related to the bent material.

Under similar forming conditions of custom tubing bending, the bending machine can produce this information corruption under similar forming conditions of bending speed and high resistance tension. Note for custom metal tube bending: For different profiles, different molds, and different extruders, the processing technology cannot be completely the same. It should be adjusted reasonably according to the performance of the extrusion equipment to ensure the effective performance of the equipment and the performance of the raw materials. In practice, there will be a lot of different differences. After starting from different angles, you can effectively adopt a variety of different categories. It often follows whether to heat its elbow, it can be divided into cold bending and even two kinds of hot bending. When processing, according to different bends, no filler can effectively separate the core bend tube from the unoccupied one. The stainless steel elbow is relatively thin. The method used in the bending process of stainless steel is all cold bending.

Bending pipe processing is widely used in various industries. The products are in air conditioners, refrigerators, automobile oils, heat exchangers, aerospace, etc., which are inseparable from the use of stainless steel pipes, and are very common in pipe installation projects. One of the pipe fittings. Mainly use its touch screen to use its touch screen screen plus CNC module, and use its dialogue method, the product adopts this program, which is very simple and easy to use, and the bed structure of the entire device is very stable and not easy to deform.